เครื่องชาร์จ BH-USB-C03 ชาร์จ AA และ AAA ได้สูงสุดถึง 4 ก้อน มีหน้าจอ LCD แสดงสถานะ

เครื่องชาร์จ ชาร์จ AA และ AAA ได้สูงสุดถึง 4 ก้อน มีหน้าจอ LCD แสดงสถานะ ช่องชาร์จอิสระทุกช่อง

• ชาร์จถ่านได้ 1-4 ก้อน สำหรับถ่าน AA และ AAA
• มีระบบตัดไฟอัตโนมัติ
• ชาร์จ 7 ชั่วโมง
• ใช้ได้ทั้งถ่าน NI-CD และ NI-MH

Specification:

Features:

1.The charger has a built-in intelligent charging protection circuit.

2. Intelligent three-stage charging mode, constant voltage/constant current/trickle charging.

3. When the battery is fully charged, it will automatically stop charging, which will not cause the battery to be overcharged and prolong the service life of the battery.

Package included:

1 x AA AAA Battery Charger

1 x USB Cable

1 x Manual

Product function description:

1. Connect the USB port of the USB charger to the output port of the DC DC 5V 2A charging base through the charging cable. When there is no battery installed, the LCD screen on the charger enters the self-checking state, and the full screen lights up for 3 seconds After the screen goes out, you can load the battery to activate and enter the charging state.

2. After the battery is put into the charger, the charger detects the battery status and displays the charging status after displaying the remaining 3 seconds of the battery, and CHG is the charging indicator.

3. When the battery is fully charged, the LCD displays full charge and the charging state stops. If the battery indicator light stops flashing, when the CHG keeps on, it enters the trickle charge state and charges for 5 minutes at low current. When CHG turns off, the charger stops working at this time, and the blue backlight stays on for 3 seconds and then turns off.

4. If you install 1.5V alkaline or carbon dry batteries or non-rechargeable batteries, the charger display will report an error and disconnect the charging tube. The charger has battery internal resistance detection, if you install a small-capacity NI-CD rechargeable battery Or the high internal resistance NI-MH battery, the charger LCD displays ERROR, indicating that the battery cannot be charged. At this time, the charger is disconnected from the power supply and does not charge.